Loose straps and failed joints: what to inspect
Load settling, insufficient tension or an unsuitable joint can leave straps loose. Inspect the joint separately from the roll material and check tool condition, settings and consumables. Review whether the load compresses during storage. Record the strap and tool details and test any corrected method on a representative sample before returning to routine packing.
Inspect the goods as well as the band. A compressed carton or settled bundle may leave a previously tight strap loose. Compare the load dimensions and corner protection before and after handling to locate a change in the supporting structure.
For a failed joint, keep the joined ends and record the tool and consumables used. Check for inconsistent operation or wear according to the tool instructions. Do not try to solve a joining problem by applying more tension without review.
After a correction, assess a complete pack rather than pulling on an unused length of strap. Repeat the normal transfer and storage sequence. Record the result so purchasing, operators and maintenance staff can use the same evidence when approving the change.
Confirm your specification
Specify width, thickness, roll length or net material weight, core size, colour, packing, quantity and destination. Final dimensions and performance are confirmed by the sample and order.
Product details are based on the GUDE catalogue and supplied photographs; operating guidance is general and must be verified on your equipment.
Discuss your requirements